Indicator Switch Replacement This small lever is responsible for quite a lot of vital functions.

In our case, it was impossible to keep the high beam turned on: A significant detail for people wearing sunglasses, even at night.

These two high-tech levers are located under the steering weel.

The lower cover is held by three philips-screws.

The top cover is kept in his place by two metal tongues, and can be removed with gentle force.

The levers are mounted with two more screws, this time you need a 8mm wrench.

... the complete electrical wiring is combined into two connectors, who can be pulled off after opening the securing brackets.

Here's the troublemaker, marked with the Ford-Nr. 74BG13335AB.

---

After repair or replacement ...

..slide on the connectors.

Don't ruin the aluminium thread by tightening the screws too much .

Slide on the upper cover first, it's easier to fit together top and bottom this way.

Put the 3 screws back in.

Finally: Check function!. Well, there shall be light.

If this page is not a part of www.taunus.at , please click on the car !! This page ist not connected with the Ford Motor Company Austria.